Key Features
Single-zone paging
Telephone interfaces: loop start trunk, ground start trunk, station access (analog ring-up), page port contact closure activation, page port voice activation
Simple 2-switch interface setup
Override paging (using loop start trunk or page port contact closure activation)
Programmable activation of AUX contacts
C-form contact
Two audio outputs (Page Only and Page with Background Music) both with level controls
Each output can provide audio drive for 150 selfamplified speakers
High impedance transformer-isolated background music input with volume control
Variable music mute
Night Ringer (contact closure activation)
Tone Trigger (tone and duration selectable, closureactivated)
Tone burst (2 to 7 sec), chime, and slow whoop tone selections
Pre-Announce/Confirmation Tone
Adjustable output limiter with threshold control and active indicator
Programmable timers control page duration (station and trunk)
DTMF programming
DTMF Block to help suppress DTMF tones over paging system
Non-volatile memory for setup data (no backup battery required)
Setup Tone to assist in volume setting
Pluggable terminal strips
Microcontroller-based operation
Wall mounting flanges
Rack panel kit with security cover available (RPKUTI1 sold separately)
| Manufacturer | Bogen |
|---|---|
| Manufacturer Part Number | UTI1 |
| Product Name | Bogen UTI1 Single-Zone Universal Telephone Interface |
| Product Type | Controller |
| Input Impedance | 600 ohms (nominal) |
| Input Level | -10 dBm (nominal) |
| VOX Sensitivity | -30 dBm |
| BGM Input Impedance | 20k ohms |
| Music Input Level | -10 dBm (nominal) |
| Output Level | -10 dBm (nominal) |
| Output Impedance | 8 ohms |
| Speaker Drive Capacity | 150 |
| Timer Duration | Default: 10s to 990s |
| VOX 1s to 9s | |
| (both defeatable) | |
| CPC Disconnect | Pulse greater than 300ms |
| Contact Closure | 2A @ 30V DC |
| 0.6A @ 125V AC | |
| DC Output | 1A @ 24V DC |
| Voltage | 120V AC |
| Current | 0.5A |
| Temperature | 0 to 104º F (-18 to 40º C) |
| Humidity | 0 to 85% non-precipitating |
| Approvals | C-UL (UL60950); FCC Part 68 Registered; FCC Part 15 Compliant; Industry Canada CS-03 |
Frequently Asked Questions
Bogen UTI1 Single-Zone Universal Telephone Interface | New
What is the Bogen UTI1 Single-Zone Universal Telephone Interface used for?
Can the UTI1 be used with any telephone system?
How many zones does the Bogen UTI1 support?
Does the UTI1 support background music?
Can the UTI1 be powered using PoE (Power over Ethernet)?
What type of connections does the UTI1 have?
Is there a built-in amplifier in the UTI1?
Can the UTI1 be used for emergency paging?
What is the power requirement for the UTI1?
Does the UTI1 have adjustable volume controls?
Can the UTI1 interface with IP-based telephone systems?
Is there a way to disable the background music during a page?
Does the UTI1 support DTMF tones for paging?
What is the paging input sensitivity of the UTI1?
Can the UTI1 be rack-mounted?
Does the UTI1 provide talk-back capability?
What is the typical application for the UTI1?
Does the UTI1 have built-in surge protection?
How do I connect the UTI1 to my existing PA system?
Bogen UTI1 Single-Zone Universal Telephone Interface | New
Bogen
