Panasonic product list KX-TD50, KX-TD100, KX-TD200 KX-TDA Digital Hybrid IP-PBX System & Voice Processing Systems.

 

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight

KX-TDA HYBRID IP PBX CONTROL UNITS

KX-TDA50

 

 

CONTROL UNIT
The KX-TDA50 control unit is initially configured with 4 Super Hybrid Extension Ports and 4 Loop Start CO ports (1 LCOT card), Power Supply, RS-232 port, USB port, MOH port, Paging port and a SD card. The system is expandable to 8 COs and 24 Extension ports. Please refer to the KX-TDA50 Capacities Chart #5.

Features
• Multi-Cell Wireless KX-TD7680, KX-TD-7690, KX-T7885, KX-TD7895
• VOIP Gateway with QSIG (Enhanced System Networking)
• PC-Based Programming
• DXDP (Digital Extra Device Port)
• Automatic Route Selection (ARS)
• Toll Restriction
• Caller ID Name & Number to (DPT, APT & SLT)
• Voice Mail Integration
• Uniform Call Distribution (UCD)
• Compatible with KX-T7600, 7400, 7700 Series and SLT Telephones
• Direct Inward System Access (DISA)
• Works with KX-T7000, KX-T7200, KX-T7400, KX-T7600, KX-T7700
 
Documents

1 9.03 lbs. 85076-1
KX-TDA100

CONTROL UNIT
 Maximum Capacity 96 ports Contains:
1 Cabinet with 5 Free Slots
1 Main Processor Unit– (Power Supply Not Included; See page 3)
1 SD Card

Features
• Multi-Cell Wireless KX-TD7680, KX-TD-7690, KX-T7885, KX-TD7895
• VOIP Gateway with QSIG (Enhanced System Networking)
• VOIP Extensions
• PC-Based Programming
• DXDP (Digital Extra Device Port)
• Automatic Route Selection (ARS)
• Toll Restriction
• Caller ID (Name & Number)
• ISDN Primary Rate Interface (PRI) with QSIG
• T1
• Voice Mail Integration
• Uniform Call Distribution (UCD)
• Direct Inward System Access (DISA)
• Works with KX-T7000, KX-T7200, KX-T7400, KX-T7600, KX-T7700
• Networking
• Non-Blocking
• Includes CPU card
 
Documents

1 18.5 lbs. 85018-1
KX-TDA200

CONTROL UNIT
Maximum Capacity 192 ports Contains:
1 Cabinet with 10 Free Slots
1 Main Processor Unit– (Power Supply Not Included; See page 3)
1 SD Card

Features
• Multi-Cell Wireless KX-TD7680, KX-TD-7690, KX-T7885, KX-TD7895
• VOIP Gateway with QSIG (Enhanced System Networking)
• VOIP Extensions
• PC-Based Programming
• DXDP (Digital Extra Device Port)
• Automatic Route Selection (ARS)
• Toll Restriction
• Caller ID (Name & Number)
• ISDN Primary Rate Interface (PRI) with QSIG
• T1
• Voice Mail Integration
• Uniform Call Distribution (UCD)
• Direct Inward System Access (DISA)
• Works with KX-T7000, KX-7200, KX-T7400, KX-T7600, KX-T7700
• Networking
• Non-Blocking
 
Documents

1 25.4 lbs. 85019-8

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight
MOUNTING HARDWARE FOR KX-TDA CONTROL UNITS

KX-A244

19” BRACKET FOR THE KX-TDA50
For mounting the KX-TDA50 cabinet in a 19” rack.

1 3.85 lbs. 85112-6

KX-A243

19” Bracket for the KX-TDA100
For mounting the KX-TDA100 cabinet in a 19” rack.

1 2.46 lbs. 85111-9

KX-A242

19” BRACKET FOR THE KX-TDA200
For mounting the KX-TDA200 cabinet in a 19” rack.

1 1.52 lbs. 85110-2
KX-TDA100 & KX-TDA200 SYSTEM POWER SUPPLIES (1 REQUIRED PER SYSTEM)

KX-TDA0103

 

L-TYPE POWER SUPPLY
Large plug in system power supply for use in the KX-TDA200 basic shelf. To determine the correct size power supply for your application, please refer to the Power Supply Sizing Chart #1.

1 7.58 lbs. 85020-4

KX-TDA0104

M-TYPE POWER SUPPLY
Medium plug in system power supply for use in the KX-TDA100 or KX-TDA200 basic shelf. To determine the correct size power supply for your application, please refer to the Power Supply Sizing Chart #1.

1 6.92 lbs. 85021-1

KX-TDA0108

S-TYPE POWER SUPPLY
 Small plug in system power supply for use in the KX-TDA100 basic shelf. To determine the correct size power supply for your application, please refer to the Power Supply Sizing Chart #1.

1 5.82 lbs. 85028-8
KX-TDA100 & KX-TDA200 EXPANSION CARDS AND ACCESSORIES
KX-TDA100/200 STATION CARDS

KX-TDA0143

4-PORT CELL STATION INTERFACE CARD (CSIF4)
 Required for multi-cell operation when using the (KX-TDA0142) 3-channel Cell Station. Supports up to 4 (KX-TDA0142) Cell Station. One card requires one free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 1.06 lbs. 85119-5

KX-TDA0144

8-PORT CELL STATION INTERFACE CARD (CSIF8)
Required for multi-cell operation when using the (KX-TDA0142) 3-channel Cell Station. Supports up to 8 Cell Stations (KX-TDA0142). 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 3.81 lbs. 85024-2

KX-TDA0170

8-PORT DIGITAL HYBRID LINE CARD (DHLC8)
8 ports per card. Supports KX-T7600, KX-T7400 (DPT), KX-T7700 (APT) series telephones. Single Line (SLT), DSS console and KX-T0141, 2 Port Cell Station. 2 ports provide power failure transfer. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

 

 3 4.45 lbs. 85027-3

KX-TDA0171

8-PORT DIGITAL LINE CARD (DLC8)
8 ports per card. Supports KX-T7600 and KX-T7400 series telephone (DPT), DSS console and KX-T0141, 2 Port Cell Station. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 4.92 lbs. 85028-0

KX-TDA0172

16-PORT DIGITAL LINE CARD (DLC16)
16 ports per card. Support KX-T7600 and KX-T7400 series (DPT) Telephones, DSS consoles and KX-T0141, 2 Port Cell Station. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 4.32 lbs. 85029-7

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight
KX-TDA100/200 STATION CARDS (Continued)
KX-TDA0173

8-PORT SINGLE LINE CARD (SLC8)
8 ports per card. Supports single line telephones (SLT). 2 ports are equipped with power failure transfer and 8 DTMF receivers. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 4.10 lbs. 85030-3
KX-TDA0174

16-PORT SINGLE LINE CARD (SLC16)
16 ports per card. Supports single line telephones (SLT). 4 ports are equipped with power failure transfer and 16 DTMF receivers. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 4.38 lbs. 85031-0
KX-TDA0175

16-PORT SINGLE LINE CARD WITH MESSAGE WAITING (MSLC16)
16 ports per card. Supports Single Line Telephones with and without Message waiting lights. 4 ports are equipped with power failure transfer. Also equipped with 16 DTMF receivers. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 4.69 lbs. 85032-7
KX-TDA0470

16-CHANNEL IP EXTENSION CARD (IP - EXT16)
The KX-TDA0470 is required when using IP Telephones (KX-NT136). Each KX-TDA0470 card requires one free slot and supports up to 16 KX-NT136 IP extensions. A maximum of 4 cards can be installed in the KX-TDA100 and 8 can be installed in the KX-TDA200. Please refer to System Capacities Chart# 2 & 3 prior to configuring a system.

1 1.10 lbs. 85128-7

KX-TDA100/200 CENTRAL OFFICE CARDS

KX-TDA0180

8-PORT LOOP START CO TRUNK CARD (LCOT8)
8 ports per card. 2 ports have power failure transfer. 1 card requires 1 free slot. 1 optional (KX-TDA0193) 8 port caller ID card can be mounted to support caller ID. Please refer to System Capacities Chart #2 prior to configuring a system.

3 4.14 lbs. 85033-4
KX-TDA0181

16-PORT LOOP START CO TRUNK CARD (LCOT16)
16 ports per card. 4 ports have power failure transfer. 1 card requires 1 free slot. Up to two optional (KX-TDA0193) 8 port caller ID cards can be mounted to support caller ID. Please refer to System Capacities Chart #2 prior to configuring a system.

3 4.25 lbs. 85034-1
KX-TDA0187

T1 TRUNK CARD (T1)
24 ports per card. Channels assignable as LCO, GCO, DID, OPX or TIE (E&M). ANI and DID Supported. External Channel Service Unit (CSU) required. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 3.46 lbs. 85036-5
KX-TDA0290

ISDN PRIMARY RATE INTERFACE (PRI 23)
 23 ports per card. 23 B channels + 1 D channel. External Channel Service Unit (CSU) required. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 3.48 lbs. 85041-9
KX-TDA0484

4-CHANNEL IP GATEWAY CARD (IP-GW4)
Supports up to 4 IP connections for TDA system networking. H.323V.2, ITU-T, G.711 G729a and G.723.1 compliant. Web programming LAN interface 10 base T/100BASE T. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

1 1.79 lbs. 85120-1
KX-TDA0490

16-CHANNEL IP GATEWAY CARD (IP GW16)
Supports up to 16 IP connections for TDA system networking. H. 323V.2, ITU-T, G711, G729a and G.723.1 compliant. 1 card requires 1 free slot. Please refer to system capacities chart # 2 & 3 prior to configuring a system.

1 1.20 lbs. 85129-4

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight
KX-TDA100/200 RESOURCE AND FEATURE CARDS
KX-A258

BLANK SLOT COVER
Optional metal panel to cover unused free slots. One panel covers one slot. 5 panels per package.

3 3.48 lbs. 85066-2
KX-TDA0105

MEMORY EXPANSION CARD (MEC) FOR TDA100/200
For use with the KX-TDA100/200 only with version 1.1 or higher software. Required when double capacity DXDP is used. Please refer to the Memory Expansion Requirements Chart #6

3 0.33 lbs. 85118-8
KX-TDA0190

OPTIONAL 3-SLOT BASE CARD (OPB3)
This card is equipped with 3 connectors to receive the following option cards: 4 Channel Message Card (MSG4), 4-Port Doorphone Card (DPH4), and the 16-Port Echo Cancellation Card (ECHO16). Requires 1 slot. Mounts in the optional card slot or a free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 3.46 lbs. 85037-2
KX-TDA0191

4-CHANNEL MESSAGE CARD (MSG4)
Provides 4 ports for outgoing messages for DISA, Queuing, Wake-Up and internal hold melody. A maximum of 64 messages can be recorded with a maximum total recording time of 8 minutes. Mounted on the KX-TDA0190 (OPB3) card. Please refer to System Capacities Chart #2 prior to configuring a system.

3 1.43 lbs. 85038-9
KX-TDA0161

4-PORT DOORPHONE CARD (DPH4)
Required to connect doorphones (KX-T30865 and KX-T7775). Supports up to 4 doorphones and door opener relays. Mounts on the KX-TDA0190 (OPB3) card. Please refer to System Capacities Chart #2 prior to configuring a system.

3 1.65 lbs. 85025-9
KX-TDA0164

4 EIO CARD (EIO4)
Mounts on the KX-TDA0190 Optional 3-Slot Base card (OPB3). Contains 4 dry contact that allows you to control external devises such as a door strike or an automatic garage door-opener. You can also connect up to 4 external sensor devises.

3 .44 lbs. 85126-3
KX-TDA0166

16-PORT ECHO CANCELLATION CARD (ECHO16)
Provides echo cancellation for conference calls for up to 16 ports. Mounts on the KX-TDA0190 (OPB3) card. Please refer to System Capacities Chart #2 prior to configuring a system.

3 1.36 lbs. 85026-6
KX-TDA0410

CTI LINK CARD
Ethernet card for CTI communications via 10Base T for programming using LAN or WAN. Contains one RJ-45 connector. One card requires 1 slot. Mounts in the optional card slot or a free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

3 3.41 lbs. 85044-0
KX-TDA0196

REMOTE CARD
Analog modem card for remote communication. V.90 support. Mounts on the main processor card (MPR) Please refer to System Capacities Chart #2 prior to configuring a system.

3 1.23 lbs. 85040-2
KX-TDA0168

SINGLE LINE EXTENSION CALLER CARD (SLT CID)
Mounts on the KX-TDA0173 8 Port Single Line Extension Card (SLC8) only. Allows the system to pass caller ID information to single line devices. Requires TDA version 2 software or higher. Supports Bell/ETSI FSK only

3 .33 lbs. 85127-0
KX-TDA0193

8-PORT CALLER ID CARD (CID8)
Required to receive Caller ID information from the CO. Each KXTDA0193 activates caller ID on 8 CO lines. Mounts on the KX-TDA0180 and KX-TDA0181 Loop Start CO Cards. Please refer to System Capacities Chart #2 prior to configuring a system.

3 1.47 lbs. 85039-6

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight
KX-TDA50 EXPANSION CARDS AND ACCESSORIES
KX-TDA50 STATION CARDS
KX-TDA5170

4-PORT HYBRID LINE CARD  (HLC4)
4 ports per card. Supports KX-T7700 (APT) series telephones, Single Line (SLT) and DSS console, (KX-T0141) 2 port Cell Station and Voice Mail. Maximum one per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

5 4.4 lbs. 85080-8
KX-TDA5171

4-PORT DIGITAL LINE CARD (DLC4)
4 ports per card. Supports KX-T7600, KX-T7400(DPT) series telephones, DSS console, (KX-T0141) 2 port Cell Station and Voice Mail. Maximum one per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

5 4.07 lbs. 85081-5
KX-TDA5172

8-PORT DIGITAL LINE CARD (DLC8)
8 ports per card. Supports KX-T7600 & KX-T7400 (DPT) series telephones, DSS console, (KX-T0141) 2 port Cell Station and Voice Mail. Maximum two per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

5 5.18 lbs. 85082-2
KX-TDA5173

4-PORT SINGLE LINE CARD (SLC4)
4 ports per card. Supports single line telephones (SLT). Also equipped with 4 DTMF receivers. 1 card max per system. Please refer to KXTDA50 System Capacities Chart #5 prior to configuring a system.

5 4.07 lbs. 85083-9
KX-TDA5174

8-PORT SINGLE LINE CARD (SLC8)
4 ports per card. Supports single line telephones (SLT). Also equipped with 8 DTMF receivers. 2 cards max per system. Please refer to KXTDA50 System Capacities Chart #5 prior to configuring a system.

5 5.18 lbs. 85084-6
KX-TDA5175

4-PORT PROPRIETARY LINE CARD (PLC4)
4 ports per card. Supports KX-T7700 series (APT), DSS and Voice Mail. 1 card max per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

5 4.41 lbs. 85085-3
KX-TDA5176

8-PORT PROPRIETARY EXTENSION CARD (PLC8)
8 ports per card. Supports KX-T7700 Series (APT), DSS and Voice Mail. 2 cards max per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

5 5.1 lbs. 85086-0
KX-TDA50 CENTRAL OFFICE CARDS
KX-TDA5180

4-PORT LOOP START CO CARD (LCOT4)
4 ports per card. 2 ports have power failure transfer. 1 optional (KXTDA5193) 4 port caller ID can be mounted to support caller ID. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

5 4.4 lbs. 85087-7
KX-TDA5480

VOIP GATEWAY CARD (IPGW4)
Supports up to 4 IP connections for networking the KX-TDA50 to other KX-TDA systems. H.323V.2, ITU-T, G729a, G.723.1 and G711 compliant. 1 card max per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

1 4.07 lbs. 85091-4
KX-TDA50 ACCESSORIES
KX-TDA5105

MEMORY EXPANSION CARD (MEC) FOR TDA50
For use with the KX-TDA50 only with version 1.1 or higher software. Required when DXDP is used. Please refer to the Memory Expansion Requirements Chart #7

5 0.11 lbs. 85121-8

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight
KX-TDA50 ACCESSORIES (Continued)
KX-TDA5161

4-PORT DOORPHONE / DOOR OPENER CARD (DPH4)
Support up to 4 doorphones (KX-T30865 or KX-T7775). Also equipped with 4 dry contacts for connection to electric door strike or other compatible type equipment. Maximum 1 per system.

5 6.3 lbs. 85077-8
KX-TDA5166

8-CHANNEL ECHO CANCELLER CARD (ECHO8)
Provides echo cancellation for conference calls for up to 16 ports. Max 1 per system

5 3.85 lbs. 85078-5
KX-TDA5168

EXTENSION CALLER ID CARD (EXT-CID)
Required to pass Caller ID to Single line telephone, fax answering machines etc. Supports up to 8 SLT devises. One card per system. Mounts in any of the optional slots.

5 3.85 lbs. 85079-2
KX-TDA5193

4-PORT CALLER ID CARD (CID4)
Required to receive Caller ID information from the CO. Each KXTDA5193 activates caller ID on 4 CO lines. Mounts on the KX-TDA5180 Loop Start CO Card.

5 1.10 lbs. 85089-1
KX-TDA5196

REMOTE CARD (V.90) (RMT)
Modem card for remote maintenance and programming. Maximum 1 per systems

5 .881 lbs. 85090-7
KX-A236

ADDITIONAL AC POWER SUPPLY
Optional external power supply required when over 4 KX-T7000, 7200, 7300, 7400, 7700 series telephones and over 4 KX-T0141 Cell Stations are installed. Please refer to the KX-TDA50 Capacities Chart #5

5 9.92 lbs. 85092-1
KX-TDA5191

2-CHANNEL MESSAGE CARD (MSG2)
Provides 2 ports for outgoing messages for DISA, Queuing, Wake-Up and internal hold melody. A maximum of 32 messages can be recorded with a maximum total recording time of 8 minutes.

5 3.85 lbs. 85088-4
OPTIONAL SOFTWARE
KX-TDA0350

 

PC PHONE SOFTWARE
Software to make a PC emulate as a TDA telephone/extension. Includes 5 user licenses. Requires KX-T7601 USB Expansion Module.

1 1.69 lbs. 85043-3
KX-TDA0920

CTI/NETWORK SYSTEM APPLICATION SOFTWARE FOR TDA100/200
SD Card that contains software to support Enhanced CTI functions and network DSS/BLF operation. Requires version 2.0 software.

3 .32 lbs. 85133-1
KX-TDA5920

CTI/NETWORK SYSTEM APPLICATION SOFTWARE FOR TDA50
SD Card that contains software to support Enhanced CTI functions and network DSS/BLF operation. Requires version 2.0 software.

3 .32 lbs. 85133-1
MULTI-CELL WIRELESS
KX-T0141

2-CHANNEL CELL STATION (CS)
2 port cell station for use with multi-cell wireless feature in the KX-TDA50, 100 and 200. The KX-T0141 connects directly to an extension port, compatible with DHLC8, DHLC16 and HLC4 cards in the KX-TDA 100/200 and the 4 initial Super Hybrid Ports, DLC4 and DLC8 cards in the KX-TDA50. Please refer to Charts #2 and #5 for maximum capacity information.

5 2.86 lbs. 85093-8

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight
MULTI-CELL WIRELESS (Continued)
KX-TDA0142

3-CHANNEL HIGH DENSITY CELL STATION (CS)
3-port cell station unit ** For use with KX-TDA100, KX-TDA200 ONLY ** Requires the KX-TDA0144 8-port Cell Station or the KX-TDA0143 4 port Cell Station Interface card. Required for multi-cell wireless operation. Recommended for high user multi cell wireless TDA systems. Suggested for larger premise (longer distance) installations. 		3 3.74 lbs. 85023-5

KX-TD7690

Backlit LCD Display

2.4GHZ EXECUTIVE WIRELESS HANDSET
 5-Line LCD with Back-Light
• Navi-key operation
• Supports PBX Functionality
• Headset Jack
• Speakerphone
• Vibrator Ringing
• Auto Answer
Compatibility
  • Not a stand alone phone, must be used with a Panasonic Phone System and Cell Stations(sold separately). Compatible with the KX-TAW848 system, and all KX-TDA phone systems.
Documents
3 5.31 lbs. 85060-0

 

KX-TD7680


Backlit LCD Display

2.4GHZ WIRELESS HANDSET
3-Line LCD with Back-Light
• Navi-key Operation
• Supports PBX Functionality
• Headset Jack
• Speakerphone
• Vibrator Ringing
• Auto Answer
 
Compatibility
  • Not a stand alone phone, must be used with a Panasonic Phone System and Cell Stations(sold separately). Compatible with the KX-TAW848 system, and all KX-TDA phone systems.
Documents
3 4.51 lbs. 85067-9

 
KX-A264

CARRYING CASE FOR KX-TD7680
Black, carrying case with belt clip for the KX-TD7680. 		6 0.91 lbs. 85113-3
KX-A269

CARRYING CASE FOR KX-TD7690
Black carrying case with belt clip for the KX-TD7690. 		12 1.55 lbs. 85065-5
PSZZTD142CE

SITE SURVEY CELL STATION BATTERY PACK
Used to power the KX-TDA0142 or the KX-T0141 Cell Station, making it portable. The Cell Station, along with a KX-TD7680 or a KXTD7690 can be used as a site survey tool to assist the installer in determining coverage and the placement of the cell stations. Requires 1 PSZZ1TD0142 power supply adapter. Must be purchased from the Panasonic Parts Center at: 800-833-9626. 		N/A N/A N/A
PSZZ1TDA0142

BATTERY PACK CELL STATION CONNECTOR
Consists of a connector to connect the Cell Station battery pack to Cell Station when doing site surveys. 1 required with the Cell Station Battery Pack Must be purchased from the Panasonic Parts Center at: 800-833-9626. 		N/A N/A N/A
PROPRIETARY WIRELESS TELEPHONES
KX-T7885
KX-T7885-W

 

 PROPRIETARY WIRELESS MULTI-LINE TELEPHONE
WITH BACKLIT LCD DISPLAY
Operation Frequency 902-928 MHz
• 12 CO Line Capability
• 3-Line Multifunction Backlit LCD Display
• Message Waiting
• Caller ID (APITS)
• Headset Jack
• Programmable Ringing or Vibrator
• Dual Mode (SLT or APITS)
• 30-Channel Auto Scanning
• Separate Charging Unit
• Remote Locatable Antenna
• One Long Life, Fast Charge Nickel-Metal Hydride Battery Included.
 
Compatibility
  • Not a stand alone phone, must be used with a Panasonic Phone System. Compatible with all KX-TA, KX-TD, and KX-TDA phone systems
Documents
3 11.4 lbs. 82591-2 
       White
Backlit LCD Display KX-T7885-W: WHITE VERSION 3 11.4 lbs. 82630-8

Model Number

Description

Per Master Carton

UPC

Code
0-37988-
Units Weight
PROPRIETARY WIRELESS TELEPHONES (Continued)

KX-TD7895 KX-TD7895-W

 

 DIGITAL SPREAD SPECTRUM (SST) MULTI-LINE TELEPHONE
 900 MHz Spread Spectrum Technology (SST)
• 2 Modes (APITS and SLT)
• 3-Line Multifunction Backlit LCD Display
• 25-Channel Auto Scanning
• 12 Programmable Line/Feature Buttons (APITS Mode)
• Separate Charging Unit
• Separate Wall Mountable Base Antenna
• Headset Jack
• Programmable Ring or Vibrator
• One Nickel Metal Hydride Battery Included.
 
Compatibility
  • Not a stand alone phone, must be used with a Panasonic Phone System. Compatible with all KX-TA, KX-TD, and KX-TDA phone systems
Documents
1 10.6 lbs. 82610-0
White
Backlit LCD Display KX-TD7895-W: WHITE VERSION 1 10.6 lbs. 82682-7
KX-A276

3.6 VOLT NICKEL METAL HYDRIDE BATTERY
For use with the KX-T7885 		3 1.9 lbs. 82593-6
KX-A276-W

3.6 VOLT NICKEL METAL HYDRIDE BATTERY
For use with the KX-T7885 		3 1.9 lbs. 82631-5
IP TELEPHONES
KX-NT136
KX-NT136-B

IP TELEPHONE
Equipped with a 6 line backlit LCD display, 24 Programmable buttons, 12 fixed buttons for (Intercom, Conference, Pause, Forward/Do Not Disturb, Flash/Recall, Auto Answer/Mute, Auto Dial/Store, Hold, Transfer, Message, Redial, Flash/Recall and Speakerphone). Also equipped with a Navigation Key, Headset Jack and can be Wall Mounted. The KX-NT136 IP telephone can only be connected to a managed wide a or local area network. Requires KX-TDA0470 16 channel IP extension card to be installed in KX-TDA100 or KX-TDA200 and connected to the same network. The KX-NT136 can be powered through the LAN (POE) or an optional power adaptor KX-A237 (sold separately) Please refer to Chart # 2 & 3 prior to configuring a system. 		3 3.46 lbs. 85130-0
 
      Black
3 3.46 lbs. 85131-7
KX-A237

AC ADAPTOR
for the KX-NT136

Includes one adaptor for use with one KX-NT136 IP telephone.
Required if power is not supplied over the network (POE).