|
Analog Terminal Adapter.
The Norstar Analog Terminal Adapter-2 (ATA-2)
converts Norstar digital interfaces
to Analog for communication with such analog devices as single line
telephones,
FAX machines, modems and answering machines. Single line sets can
interface
with Norstar system features such as Call Waiting, Call Forward and many
more.
The ATA-2 provides a means of connecting a single line set to the
Norstar system
in either a long loop or off-premise extension configuration.
The Analog Terminal Adapter-2 (ATA-2) supports all the features
currently
supported by the EATA. As well, it has been enhanced to support faster
data
transmission speeds, up to and including 28.8 kbps, and has a more
compact
design for a simplified installation. (Note that the maximum data
transmission rate
is subject to the quality of the end-to-end channel and cannot be
guaranteed.)
The ATA-2 is powered by a grounded AC power supply that is packaged with
the
ATA 2 CMS/CLASS feature interworking is not supported by any version of
the
Analog Terminal Adapter.
Norstar ATA II (Analog Terminal
Adapter) NT8B90AL
The Norstar Enhanced Analog Terminal
Adapter 2 serves as an interface between
the digital station set ports and analog tip-plus-ring devices.
Features:
-
Increased data transfer speeds of
up to 28.8 kb/s.
-
Connection of analog phones, fax,
voice, etc. to a digital Norstar System
-
Compatible with all Norstar
Systems
Norstar ATA (Analog Terminal
Adapter) NT8B90AC
The Norstar Enhanced Analog Terminal
Adapter 1 serves as an interface between
the digital station set ports and analog tip-plus-ring devices.
Features:
-
Connection of analog phones, fax,
voice, etc. to a digital Norstar System
-
Compatible with all Norstar
Systems
|
 |
