|
Unit |
Electra Elite IPK KSU/CPU/Port Expansion Kit/KSU Expansion |
Stock Number |
|
Elite IPK Basic PKG |
ELECTRA ELITE IPK BASIC PKG The Package contains the following items;
- B64-U20 KSU (750015) - CPUI (300)-U10 ETU (750053) - ESIB (8)-U10
ETU (750207) |
750028 |
|
B64-U20 KSU |
KEY SERVICE UNIT The Key Service Unit (KSU) for the Electra Elite IPK
system provides up to 144 ports and can be expanded to a maximum of
192 ports with the addition of 2 expansion KSUs: (Same unit is used as
expansion KSU) The P64-U(20) PSU (power supply unit), backup
batteries, two RCA jacks for external paging and MOH input, three DB9
serial interface are included with each KSU. |
750015 |
|
CPUI (300)-U10 ETU |
CENTRAL PROCESSING UNIT The Central Processing Unit ETU contains a
32-bit microprocessor that controls the system. Included are 16,
4-party conference circuits, 4-channel PBR circuits, a tone generator,
MOH input, and two built-in melodies. One required per basic IPK KSU.
This CPUI supports up to 48 ports. |
750062 |
|
EXP-U10 ETU |
EXPANSION CABINET INTERFACE The Expansion ETU is installed in the
B64-U20 KSU for expansion. One EXP-U10 is required per expansion KSU. |
750140 |
|
EXPT(2)-U10 ETU |
EXPANSION CABINET INTERFACE The EXPT(2) is used to increase the size
of a system by connecting multiple systems together. The EXPT(2)-U( )
ETU offers the functionality of two DTI-U( ) ETUs in one ETU. Feature
compatibility between the systems linked via the EXPT(2)-U( ) ETU link
is the same as an Electra Elite IPK to another Electra Elite IPK using
K-CCIS. |
750142 |
|
PKU192-2U Unit |
ELECTRA ELITE IPK PORT KEY UPGRADE This Port Upgrade chip is installed
on the CPUI ( )-U10. This expands the system capacity to 192 Ports. |
750112 |
|
CPUI R4000 Feature Kit |
This kit contains the optional CPUI release R4000 feature pack.
Includes all previous system releases. 4000/4500 System Enhancement
Documentation CD included |
750792 |
|
CPUI R4500 Feature Kit |
This kit contains the optional CPUI release R4500 feature pack.
Includes all previous system releases. 4000/4500 System Enhancement
Documentation CD included |
750793 |
|
Elite 48 Series 9600 Upgrade Kit |
Elite 48 kit contains the upgrade to S9600. Includes previous system
releases S1500, S1600, S1700, and s2000 System Upgrade Enhancements.
9600 Documentation |
750797 |
|
Elite 192 Series 9600 Upgrade Kit |
Elite 192 kit contains the upgrade to S9600. Includes previous system
releases S1500, S1600, S1700, and s2000 System Upgrade Enhancements.
9600 Documentation |
750798 |
|
Unit |
Electra Eliteฎ IPK IPCPU |
Stock Number |
|
IPCA(200)-U10 |
IP CPU Processor supports up to 30 IPK Video soft phones or Megaco IP
stations. Installs in an interface slot and does not impact system
port capacity. Includes 3 IPK Video Softphone licenses sn# 750850 |
750102 |
|
IPCA Upgrade Kit |
IPCA 100 to 200 Upgrade Kit. 12 Session Initiation Protocol (SIP)
Trunks are supported. |
750789 |
|
MG(8)-U10 |
Media Gateway links IPCA to TDM CPU. Installs in an interface slot and
impacts system trunk capacity by 8. |
750107 |
|
IPK Video Softphone for the IPCA |
Licenses for support of 1 Video Softphone using the IPCA(100/200).
Requires S2500, 3500 or 4500 optional feature upgrade. |
750850 |
|
Unit |
Electra Elite IPK KSU Options |
Stock Number |
|
RAK-U10 Unit |
19 RACK MOUNT UNIT 19 Rack mount unit for Elite IPK KSU |
750394 |
|
External Battery Cable Kit |
EXTERNAL BATTERY BACK-UP CABLE Used to connect locally supplied
external backup batteries |
750386 |
|
CLKG-U10 UNIT |
CLOCK UNIT T1/ISDN BRI/ISDN PRI/Wireless/K-CCIS (T1) Clock unit
provide synchronization for T1 lines, ISDN basic and prime rate and
wireless ZTII-U connections. The unit is piggybacked on the CPUI (
)-U10 ETU and supports the DTI-U10/20/30 ETUs, BRT (4)-U10/20 ETUs,
PRT (1)-U10 ETUs and BSU (2)-U10 ETUs. |
750130 |
|
PBR ( )-U10 ETU |
PUSH BUTTON RECEIVER UNIT (4 circuits) The Push Button Receiver ETU
detects and translates DTMF tones generated by Single Line Telephones,
modems, or facsimile machines. Four PBR circuits are built into the
CPUI ( )-U10 ETU. |
750250 |
|
HUB (8)-U10 ETU |
The Hub ETU provides an in-skin switching hub for Ethernet
applications. It also provides QoS services as well as port
mirroring. |
750109 |
|
Unit |
Electra Elite IPK Spare Batteries |
Stock Number |
|
System Power Battery |
B64 System Power Battery Back-up - two 12V 2.6Ah |
750830 |
|
P64-U20 PSU |
SPARE POWER SUPPLY Replacement Power Supply unit for the Electra Elite
IPK KSU. |
750121 |
|
Unit |
Electra Elite IPK Spare Batteries |
Stock Number |
|
Memory Battery |
REPLACEMENT BATTERY for CPU, MIFM, and MIFA Memory (NiCAD 3.6V 60mAH) |
490719-0 |
|
TDM Interface Packages |
|
Unit |
Digital, Analog and OPX Station Interface |
Stock Number |
|
|
ELECTRONIC STATION INTERFACE UNIT |
|
|
|
The Electronic Station Interface ETU contains 8 circuits. Each circuit
can |
|
|
ESIB (8)-U10 ETU |
support one digital multi-line terminal (Electra Elite IPK, Electra
Elite, Dterm ฎ Series E
or Dterm Series i set, Message Display Board, Attendant Add-On
Console, Single Line Telephone adapter, Dterm Cordless Terminal, or
Dterm Extender. |
750207 |
|
|
ESIB (8)-U10 can mount ESIE (8)-U10 as piggyback. |
|
|
|
ELECTRONIC STATION INTERFACE PIGGYBACK UNIT |
|
|
ESIE (8)-U10 Unit |
Same functions as ESIB (8)-U10. ESIE (8)-U10 is piggyback module on
ESIB (8)-U10. This ESIE (8)-U10 can |
750209 |
|
|
connect digital multi-line terminal from front RJ61 connectors. |
|
|
ESI (8)-U10 ETU |
ELECTRONIC STATION INTERFACE UNIT Same function as ESIB (8)-U10
without expansion capability. |
750210 |
|
SLIB (4)-U10 ETU |
SINGLE LINE INTERFACE UNIT This Single Line Telephone ETU supports 4
Single Line Telephones and/or analog voice mail ports. This ETU
provides Ringing Signal Generator (RSG), and Message Waiting (MW) LED
voltage to Single Line Telephones. |
750217 |
|
|
SINGLE LINE INTERFACE PIGGY-BACK UNIT |
|
|
SLIE (4)-U10 ETU |
Same functions as SLIB(4)-U10 ETI. SLIE(4)-U10 us a piggyback module
on SLIB(4)-U10. This piggyback unit |
750218 |
|
|
supports 4 Single Line Telephones and/or analog voice mail ports. |
|
|
OPX (2)-U10 ETU |
LONG LINE TELEPHONE UNIT The Off-Premise Extension ETU provides for
the termination and operation of two off-premise extensions. Each ETU
has a built-in ringer (RSG). |
750230 |
|
Unit |
Analog Trunk |
Stock Number |
|
|
CENTRAL OFFICE INTERFACE UNIT |
|
|
COI (8)-U10 ETU |
The Central Office Interface Unit supports 8 outside (CO/PBX) lines.
The outside lines can be a combination of Loop Start or Ground Start
DTMF |
750160 |
|
|
trunks. |
|
|
Unit |
Analog Trunk with Caller ID |
Stock Number |
|
|
CENTRAL OFFICE INTERFACE UNIT with CALLER ID |
|
|
COIB (4)-U30 ETU |
The Central Office Caller ID ETU detects Caller ID signals from the
central office and sends them to the Main Processor. This card
supports 4 outside (CO/PBX) lines, CO Message Waiting, transmit and
receive pads (volume control) and contains a fax branch connection.
Loop start trunks only. Supports CAMA trunks for E911. |
750449 |
|
COIB (8)-U30 ETU |
CENTRAL OFFICE INTERFACE UNIT with CALLER ID The Central Office Caller
ID ETU detects Caller ID signals from the central office and sends
them to the Main Processor. This card supports 8 outside (CO/PBX)
lines and CO Message Waiting and , transmit and receive pads (volume
control) . Loop-start trunks only. Supports CAMA trunks for E911. |
750451 |
|
Interface Packages |
|
Unit |
DID / Tie Lines |
Stock Number |
|
DID (4)-U10 ETU |
DIRECT INWARD DIALING INTERFACE UNIT The Direct Inward Dialing
Interface supports up to four DID or four 2-way DID lines. Immediate,
wink start, delay start and second dial tone signaling are
accommodated. |
750170 |
|
|
TIE LINE INTERFACE UNIT |
|
|
TLI (2)-U10 ETU |
The Tie Line Interface ETU supports the termination and operation of
up to two E&M Tie lines (4-wire, type I and type V, and 10/20 pps Dial
Pulse or DTMF). Immediate, wink start, delay start, and second dial
tone signaling are accommodated. |
750180 |
|
Unit |
Digital Trunk (T1) / ISDN |
Stock Number |
|
DTI-U40 ETU |
DIGITAL TRUNK INTERFACE UNIT (required for T1 K-CCIS) The Digital
Trunk Interface Unit provides for the termination of T1/Fractional T1
(24 DS-0 channels) lines with ANI. Tie line (E&M), DID signaling, loop
start, and ground start are supported. It is required in the use of K-CCIS
activity. A CLKG-U10 Unit must be connected to the CPUI ( ) -U10 ETU. |
750196 |
|
BRT (4)-U20 ETU |
BASIC RATE INTERFACE UNIT The Basic Rate Interface Unit provides 4
channels (8 voice channels) for ISDN Basic Rate Interface. When
connecting to a CO, a Network Termination Unit (NT1) is required, and
a CLKG-U10 Unit must be connected to the CPUI ( ) -U10 ETU. |
750201 |
|
|
PRIMARY RATE INTERFACE UNIT |
|
|
PRT (1)-U20 ETU |
The Primary Rate Interface Unit provides for the termination of an
ISDN PRI line for voice service only. This unit supports 4ESS(AT&T
Custom), AT&T 5ESS(Lucent Custom), DMS-100 (Custom and National ISDN)
and NI-2 protocols. A CLKG-U10 unit must be connected to the CPUI (
)-U10 ETU. Version 4.0 current release. |
750476 |
|
|
PRT UPGRADE FIRMWARE 4.00 |
|
|
PRT Firmware Upgrade |
Version 4.0 supports full fractional PRI (any combination of channel).
Also this firmware supports Call by Call, E911 service and DID
functionality |
750761 |
|
|
(V2.12) and Caller ID Name and Calling Party Number (CPN) (V3.50). |
|
|
MEGACO IP Station Interface for IPK Telephones IP K-CCIS & SIP Trunk
Interface |
|
Unit |
IP Station or IP Trunk Card |
Stock Number |
|
IAD(8)-U10 ETU |
This ETU provides support for MEGACO IP stations or IP K-CCIS/SIP
trunks. This ETU can assign maximum 8 MEGACO IP stations or 8 IP K-CCIS/SIP
trunks. One IP Solutions CD-ROM is required per ETU ordered. |
750266 |
|
IP Solutions CD-ROM |
This CD provides software to be loaded on the IAD-U10 ETU. It contains
software for MEGACO IP Stations and IP K-CCIS/SIP trunks. |
750454 |
|
IX1035/IAD Bundle Kit |
This package contains a BlueFire ฎ
IX1035, IAD (8)-U10 ETU and IP Solution CD-ROM. |
750043 |
|
IX2010/IAD Bundle Kit |
This package contains a BlueFire IX2010, IAD (8)-U10 ETU and IP
Solution CD-ROM. |
750044 |
|
H323 IP Trunk Interface |
|
Unit |
VOIP Trunk Solutions |
Stock Number |
|
|
This ETU provides support for H323 trunks. This ETU provides an H.323 |
|
|
IAD H323 |
connection to an H.323 network. One IAD H323 ETU supports a |
750265 |
|
|
maximum 8 connections. Includes CD software. |
|
|
|
Electra Elite IPK Applications |
|
|
Unit |
Applications (Hardware) |
Stock Number |
|
CCH (4)-U10 ETU |
COMMON CHANNEL HANDLER (CCH) (K-CCIS) This ETU provides a common
channel signal through the DTI to a K-CCIS network responsible for
signaling between the CPU and the K-CCIS network. DTI-U30 ETU and
CLKG-U10 unit are needed. Current version 4.xx. |
750145 |
|
CCH Firmware Upgrade |
CCH UPGRADE FIRMWARE 4.xx Upgrades CCH(4)-U10 ETU version 1.xx, 2.xx,
3.xx to 4.xx. |
750762 |
|
VRS (4)-U10 ETU |
VOICE RECORDING SERVICE This ETU provides Automated Attendant, voice
messages for internal stations, automatic answering on incoming
outside calls and Delay Announcement messages for ACD Electra Stat /UCD.
Each system supports a maximum of two VRS (4)-U10 ETUs. |
750240 |
|
CNF (8)-U10 ETU |
MULTI-LINE CONFERENCE BRIDGE Provides the ability to support either
one 8-party or two 4-party conferences. Each conference is DSP
amplified, balanced and password protected. |
750175 |
|
DPH (4)-U10 ETU |
DOOR PHONE INTERFACE UNIT The Door Phone Interface ETU allows 4
DP-D-1A door phones to be connected. Two simultaneous calls are
allowed and up to four door lock release relays are provided. |
750310 |
|
|
EXTERNAL CONTROL RELAY UNIT |
|
|
ECR-U10 ETU |
The External Control Relay ETU provides common audible tone signaling
using relay contacts for external ringing equipment, an audio output
for external paging systems and connection for external background
music. Ten relays are provided: four for External Tone Ringer Control,
one for Night Chime, two for External Paging and two for General
Purpose. |
750300 |
|
Unit |
PC Programming/SMDR/LCR/Caller ID Scrolling (Hardware) |
Stock Number |
|
SPE-U10 ETU |
Single access point (remote or direct) for configuring the system
and/or individual cards. Six physical COM ports. Two go through
the backplane to COM1 (for PC Programming) and COM2 (for SMDR) on the
side of the KSU o Four
COM ports (COM-A, COM-B, COM-C, and COM-D) are accessible along the
front of the card. These COM ports are used for interfacing to other
programmable cards such as a VMS, etc. The SPE(M)-U( ) ETU provides
three methods of communication. Serial Using COM 1 on the KSU
Modem v.34 @ 33.6 Baud Ethernet 10/100Mbps LAN/WAN Version 2.xx
current version |
750270 |
|
SPE-U10 Upgrade Kit |
SPE 2.xx upgrade Upgrades SPE(M)-U10 version 1.x to 2.x to support
Caller ID scrolling for missed calls. |
750791 |
|
MIFM-U20 ETU |
MULTIPLE INTERFACE UNIT for Multifunction This unit provides
additional memory for processing and backup of PC SAT, SMDR and
wireless programming. If LCR and/or Caller ID scrolling/callback
features are desired, the following kit is required: KMM( )U 20 Kit |
750471 |
|
MOD-U10 Modem Kit |
33.6Kbps MODEM UNIT for MIFM-U10 ETU and Dterm PC IIS This unit
piggybacks on MIFM-U10 ETU. This unit can be used for SAT PC
programming remote maintenance. |
750464 |
|
KMM( ) U-20 Upgrade Kit |
ACTIVATION KEY for MIFM-U20 This unit is mounted on the MIFM-U10 ETU
and supports LCR or Caller ID scroll/callback function. |
750731 |
|
ETH-U10 Unit Ethernet LAN PC Connection |
This unit is installed on the MIFM-U20 ETU to provide a LAN
connection. Includes POW-U10 unit that also must be installed on
MIFM-U20. |
750462 |
|
MIFM Firmware Upgrade Kit |
MIFM UPGRADE KIT 6.10 Upgrades MIFM-U10 ETU version
1.x/2.x/3.x/4.x/5.x to increase Caller ID scroll log from 10 to 50 per
station and K-CCIS Centralized Billing support. |
750790 |
|
|
Electra Elite IPK Applications |
|
|
Unit |
PC Programming Software |
Stock Number |
|
|
SYSTEM ADMINISTRATION TERMINAL (SAT) TECHNICIAN PC |
|
|
SAT for |
PROGRAM allows technicians to program all system data requirements, |
|
|
Technicians PC |
integrated DESI labels and wireless service console software. |
750458 |
|
Software |
Programming can be accessed locally or remotely. Current Release |
|
|
|
4000/4500 |
|
|
SAT for End-User PC Software |
SYSTEM ADMINISTRATION TERMINAL (SAT) END-USER PC PROGRAM allows
end-users to program system data such as; Speed Dial (Station and
System), Telephone Name assignment, Day/Night Mode settings, DESI
Labels etc. Release 4000/4500 |
750457 |
|
Elite LAN PC Programming |
This device attaches to the MIFM to convert IP into serial data. One
device (and one IP address) is needed per IPK/Elite. Includes SAT
technician PC software (750458) and SAT End-User software (750457). |
750319 |
|
Unit |
Least Cost Routing (LCR) Software |
Stock Number |
|
|
ELITE LCR PC SOFTWARE on CD, Elite LCR Manual and KMM-U |
|
|
Elite LCR 5.0 Software |
activation key. This program allows technicians to program Least Cost
Routing (LCR) data, including LAN PC Programming Option, Tabs based
format, support for K |
750383 |
|
|
CCIS look ahead routing, international and operator assisted dialing,
for the |
|
|
|
Elite IPK system. Programming can be accessed locally or remotely. |
|
|
LCR Software Upgrade Kit |
LCR S/W upgrade to 5.xx |
750739 |
|
Unit |
NEC Interactive Telephone Simulator (NITS) Electra Elite IPK Training
Unit |
Stock Number |
|
NITS 50 License Unit |
NEC Interactive Telephone Simulator Training Tool 50 Credit pkg Tel
Simulator Unit with 50 Licenses* each license valid for 2 sessions,
CD Software, USB Cable, and AC power supply. |
750038 |
|
NITS Unlimited License Unit |
NEC Interactive Telephone Simulator Training Tool Unlimited pkg Tel
Simulator Unit with Unlimited Licenses, CD Software, USB Cable and AC
power supply. |
750039 |
Questions?
Give us a call! 800 - 475 0989
